1 of 1 people found this helpful
Yes HW VPN is still allowed. apologies if this request fell through the cracks.
I can help you troubleshoot your connection. let me know when you are available. BTW, looking at your configriuation, are you using an ASA as the VPN client?
From my IT person:
I'll be on PTO until next Tuesday, but we also have the office cut over on Friday. If you would, please let him know that we are using an ASA 5505 and we had a good tunnel established when we first set up the Easy VPN.
...so won't be able to troubleshoot until he gets back.
We have not used the 5505 as a client for quite some time. We now use 800 series routers to establish a Tunnel.
Let us when you are ready to troubleshoot and we can take a look.
I was using a HW VPN to connect to the Collab Endpoints lab. But it does not seem to be connected anymore. It was working fine a while back, but is down now. Can someone check on this? My user name is scott.kooy.
I posted this before, but it has seem to have gotten lost. Joseph Kearns asked for the following information:
"SH RUN" for EASTVPN Config:
vpnclient server 184.108.40.206
vpnclient mode network-extension-mode
vpnclient vpngroup myTUNNEL password *****
vpnclient username scott.kooy password *****
"SH CRY ISA SA"
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 220.127.116.11
Type : user Role : initiator
Rekey : no State : AM_WAIT_MSG2