AnsweredAssumed Answered

TCL example its-CISCO issue

Question asked by jvazquez@mnet.com.mx on Feb 25, 2016
Latest reply on Mar 1, 2016 by jvazquez@mnet.com.mx

Hello i trying to use example its-CISCO and i getting next error .. any idea ??? general configure information below error

thanks in advence

 

*Feb 25 19:38:36.547: //187//TCL :/tcl_PutsObjCmd: proc act_Setup

*Feb 25 19:38:36.547:

*Feb 25 19:38:36.547: //187//TCL :/tcl_PutsObjCmd:

proc init_perCallvars

*Feb 25 19:38:36.551:

*Feb 25 19:38:36.551: //187//TCL :/tcl_PutsObjCmd:

ANI sip:30110@172.20.5.22

*Feb 25 19:38:36.551:

*Feb 25 19:38:36.551: //187//TCL :/tcl_PutsObjCmd:

DNIS sip:5555@172.20.5.30:5060

*Feb 25 19:38:36.551:

*Feb 25 19:38:36.551: //-1//AFW_:/AFW_Util_GetUsrContainerData: Container is present, No data

*Feb 25 19:38:36.551: //-1//AFW_:/AFW_Util_CopyLegServiceCodeToCallInfoContainer: Service Code not available on Leg

*Feb 25 19:38:36.551: //-1//AFW_:/AFW_Util_CopyLegRouteCodeToCallInfoContainer: Route Code not available on Leg

*Feb 25 19:38:36.551: //-1//AFW_:/AFW_Util_GetTgCicValue: CIC Not  found for tag(56)

*Feb 25 19:38:36.555: //-1//AFW_:/AFW_Util_CopyMLPPDataToCallInfoContainer: Voice MLPP not configured

*Feb 25 19:38:36.555: //-1//AFW_:/AFW_Util_CopyMLPPDataToCallInfoContainer: Voice MLPP not configured

*Feb 25 19:38:36.555: //-1//AFW_:/AFW_Util_CopyMLPPDataToCallInfoContainer: Voice MLPP not configured

*Feb 25 19:38:36.559: //187//TCL :/tcl_PutsObjCmd:

Call failed.  Play prompt and collect digit

*Feb 25 19:38:36.559:

*Feb 25 19:38:36.563: //187//TCL :/tcl_PutsObjCmd:

proc act_Select

*Feb 25 19:38:36.563:

*Feb 25 19:38:36.563: //187//TCL :/tcl_PutsObjCmd:

proc act_DestBusy

*Feb 25 19:38:36.563:

*Feb 25 19:38:36.567: //187/EC1D68000000/SIP/Error/sipSPI_ipip_set_history_info_header: Not SIP2SIP mode

SIP: (187) Group (a= group line) attribute, level 65535 instance 1 not found.

SIP: Attribute mid, level 1 instance 1 not found.

*Feb 25 19:38:36.587: //187/EC1D68000000/SIP/Error/sipSPIProcessAckMedia: Could not modify QoS params for midca

 

-----

 

service test its-CISCO.tcl

  paramspace english index 1

  paramspace english lenguage en

  paramspace english location flash:

  param aa-pilot 5555

  param operator 9998

 

------

dial peer

 

dial-peer voice 5555 voip

service test

session protocol sipv2

incoming called-number 5555

dtmf-relay rtp-nte

codec g711ulaw

no vad

 

 

---

 

GW version 151-4.M10

Outcomes