2 Replies Latest reply on Oct 21, 2015 4:18 PM by mtimm

    Open NX-OS - Lab 1, switch is unreachable


      I reserved an Open NX-OS lab 2 last week without issue.  However, today when I reserved the Open NX-OS Lab 1, I received the standard e-mails and the final one said everything was up and ready to go.  I connected with Anyconnect and found I was unable to ssh into the switch but could ssh into the tools server.  I'll leave my reservation up and running in case that is needed to debug the issue.





        • 1. Re: Open NX-OS - Lab 1, switch is unreachable


          when VPNed into the sandbox for this lab, please use ip address is for access to this device.


          • 2. Re: Open NX-OS - Lab 1, switch is unreachable

            Can you explain what happened?  From last night:


            $ ping

            PING ( 56 data bytes

            Request timeout for icmp_seq 0

            Request timeout for icmp_seq 1


            --- ping statistics ---

            3 packets transmitted, 0 packets received, 100.0% packet loss



            cisco@toolserver:~$ ping

            PING ( 56(84) bytes of data.

            From icmp_seq=1 Destination Host Unreachable

            From icmp_seq=2 Destination Host Unreachable

            From icmp_seq=3 Destination Host Unreachable


            --- ping statistics ---

            5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4022ms

            pipe 3



            It was as if the switch never powered on.  However, this morning it is available.