szhang2

How to upgrade the IOS image on C819

Discussion created by szhang2 on Mar 19, 2015
Latest reply on Apr 19, 2015 by gregoryiiams

1. Download the latest C819 IOx image from CCO, and put it in an SCP path or http path.

 

2. Download it to C819 through scp or http.

819#copy scp://cisco@hostname.cisco.com//tmp/c800-universalk9_iox-mz.SPA.155-1.T1.bin flash:

Destination filename [c800-universalk9_iox-mz.SPA.155-1.T1.bin]?

Password:

Sending file modes: C0644 60490692 c800-universalk9_iox-mz.SPA.155-1.T1.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[NOTE]: use "copy http://hostname.cisco.com/c800-universalk9_iox-mz.SPA.155-1.T1.bin flash:" to download the image through http.

 

3. After download the image to flash of C819. Run below to boot the C819 from the image:

819#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

819(config)#boot system flash c800-universalk9-mz.SPA.155-1.T1.bin

819(config)#^Z

819#write memory

Building configuration...

WLAN_AP_SM: Config command is not supported

[OK]

819#reload

Proceed with reload? [confirm]

Outcomes