MTU,Bandwidth event

Document created by cdnadmin on Jan 25, 2014
Version 1Show Document
  • View in full screen mode
This document was generated from CDN thread

Created by: itay dominits on 12-12-2013 06:36:56 AM
Hello

The MTU, Bandwidth listeners are triggered when someone cahnges the MTU, Bandwidth on a chosen port?
Iam using ISR platform and it keeps telling me :The method is not supported by the network element.

The MTU filter is : 
InterfaceMTUFilter filter =new InterfaceMTUFilter(null,NetworkInterface.Type.ONEP_IF_TYPE_GIGABIT_ETHERNET);

Subject: RE: MTU,Bandwidth event
Replied by: Joseph Clarke on 12-12-2013 09:01:12 AM
Yes, this method is not support on IOS.  This event is currently only supported on NX-OS and IOS-XR.  The same goes for bandwidth, VLAN, and VRF.

Subject: RE: MTU,Bandwidth event
Replied by: itay dominits on 12-12-2013 09:55:01 AM
Thank you,

But why VLAN,VRF,MTU,Bandwidth  CLI command got there own events? I can match those  events with the CLIevent , for example "ip mtu"  for MTU event 

Subject: RE: MTU,Bandwidth event
Replied by: Joseph Clarke on 12-12-2013 10:20:42 AM
The underlying event framework to catch these at the interface level is not yet implemented within IOS.  As you can see from the event details, you can get more than you would with just the CLI event.  It is this piece that would need to be implemented on IOS.  As a workaround, you can use the CLI events to match the commands as you have pointed out.

Attachments

    Outcomes