SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation

Version 1
    This document was generated from CDN thread

    Created by: Toms Jacob on 20-08-2011 08:38:31 AM
    Dear Sir,
    I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    I did the configuration for CME.
    I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    1. ISRG2 Router
    2. SM-SRE-700-K9
    3. EHWIC - 4 Port
     
    I have two Vlan
    Data : 10.31.180.0 /25
    Voice: 10.31.180.128 /25
     
    I don't want to configur other than the above vlans. I have to use the MGF functionality.
     
    Please send me a sample configuration
     
    Regards
    Toms
    Banque Saudi Fransi
    Voice communication section manager

    Subject: RE: New Message from Toms Jacob in Service Ready Engine Virtualization - Te
    Replied by: Ashwin Venkatesan on 20-08-2011 09:34:46 AM
    Hi Toms,



    Please refer to the install guide . It has a configuration   with multiple vlans.



    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html



    Regards,

    Ashwin.



    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Saturday, August 20, 2011 5:39 AM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation



    Toms Jacob has created a new message in the forum "Technical Questions":

    --------------------------------------------------------------
    Dear Sir,
    I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    I did the configuration for CME.
    I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    1. ISRG2 Router
    2. SM-SRE-700-K9
    3. EHWIC - 4 Port

    I have two Vlan
    Data : 10.31.180.0 /25
    Voice: 10.31.180.128 /25

    I don't want to configur other than the above vlans. I have to use the MGF functionality.

    Please send me a sample configuration

    Regards
    Toms
    Banque Saudi Fransi
    Voice communication section manager
    --
    To respond to this post, please click the following link:

    <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>

    or simply reply to this email.

    Subject: RE: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
    Replied by: Brett Tiller on 22-08-2011 01:27:31 PM
    Hi Toms,

    Please take a look at our 'SRE-V 1.5.1 Quick Start Guide.pdf' located in http://developer.cisco.com/web/srev/docs which provides complete steps for vlan configuration on both the router and ESXi.  I think this short document may provide you the information you are seeking.

    Thanks,

    Brett

    Subject: RE: New Message from Toms Jacob in Service Ready Engine Virtualization - Te
    Replied by: Toms Jacob on 03-09-2011 10:55:12 AM
    Hi,
    Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
    Is this will use for Router Traffic also?
     
    Also in one document I saw <font face="Courier" size="1"><font face="Courier" size="1">
    service-module mgf ip address 10.
    </font></font><font face="Courier" size="1">
     
    </font>
    P.30.2 255.255.255.0<font face="Courier" size="1"><font face="Courier" size="1">
     
    </font></font><font face="Courier" size="1">
     
    </font>
    Is this command is really required ? In the installation and configuration guide I cannot find this.
     

    Hi Toms,



    Please refer to the install guide . It has a configuration with multiple vlans.



    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html



    Regards,

    Ashwin.



    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Saturday, August 20, 2011 5:39 AM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation



    Toms Jacob has created a new message in the forum "Technical Questions":

    --------------------------------------------------------------
    Dear Sir,
    I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    I did the configuration for CME.
    I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    1. ISRG2 Router
    2. SM-SRE-700-K9
    3. EHWIC - 4 Port

    I have two Vlan
    Data : 10.31.180.0 /25
    Voice: 10.31.180.128 /25

    I don't want to configur other than the above vlans. I have to use the MGF functionality.

    Please send me a sample configuration

    Regards
    Toms
    Banque Saudi Fransi
    Voice communication section manager
    --
    To respond to this post, please click the following link:

    <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>

    or simply reply to this email.



    Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Techni
    Replied by: Vinothkumar Kamalanathan on 03-09-2011 10:55:39 AM
    I will be in PTO on 1st and 2nd Sep and will be in office from Monday 5th sep.

    Subject: RE: New Message from Toms Jacob in Service Ready Engine Virtualization - Te
    Replied by: Toms Jacob on 03-09-2011 10:16:08 AM
    Hi,
    Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
    Is this will use for Router Traffic also?
     
    Hi Toms,



    Please refer to the install guide . It has a configuration with multiple vlans.



    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html



    Regards,

    Ashwin.



    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Saturday, August 20, 2011 5:39 AM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation



    Toms Jacob has created a new message in the forum "Technical Questions":

    --------------------------------------------------------------
    Dear Sir,
    I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    I did the configuration for CME.
    I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    1. ISRG2 Router
    2. SM-SRE-700-K9
    3. EHWIC - 4 Port

    I have two Vlan
    Data : 10.31.180.0 /25
    Voice: 10.31.180.128 /25

    I don't want to configur other than the above vlans. I have to use the MGF functionality.

    Please send me a sample configuration

    Regards
    Toms
    Banque Saudi Fransi
    Voice communication section manager
    --
    To respond to this post, please click the following link:

    <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>

    or simply reply to this email.


    Subject: Re: New Message from Toms Jacob in Service Ready Engine Virtualization - Te
    Replied by: Anurag Gurtu on 03-09-2011 11:09:39 PM
    The I interface is SM X/1.

    Thanks

    Anurag Gurtu

    On Sep 3, 2011, at 7:16 AM, "Cisco Developer Community Forums" <cdicuser@developer.cisco.com> wrote:

    > Toms Jacob has created a new message in the forum "Technical Questions":
    >
    > --------------------------------------------------------------
    > Hi,
    > Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
    > Is this will use for Router Traffic also?

    > Hi Toms,
    >
    >
    >
    > Please refer to the install guide . It has a configuration with multiple vlans.
    >
    >
    >
    > http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html
    >
    >
    >
    > Regards,
    >
    > Ashwin.
    >
    >
    >
    > From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    > Sent: Saturday, August 20, 2011 5:39 AM
    > To: cdicuser@developer.cisco.com
    > Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
    >
    >
    >
    > Toms Jacob has created a new message in the forum "Technical Questions":
    >
    > --------------------------------------------------------------
    > Dear Sir,
    > I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    > I did the configuration for CME.
    > I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    > 1. ISRG2 Router
    > 2. SM-SRE-700-K9
    > 3. EHWIC - 4 Port
    >
    > I have two Vlan
    > Data : 10.31.180.0 /25
    > Voice: 10.31.180.128 /25
    >
    > I don't want to configur other than the above vlans. I have to use the MGF functionality.
    >
    > Please send me a sample configuration
    >
    > Regards
    > Toms
    > Banque Saudi Fransi
    > Voice communication section manager
    > --
    > To respond to this post, please click the following link:
    >
    > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>
    >
    > or simply reply to this email.
    >
    > --
    > To respond to this post, please click the following link:
    >
    > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4445404>
    >
    > or simply reply to this email.

    Subject: Re: New Message from Toms Jacob in Service Ready Engine Virtualization - Te
    Replied by: Anurag Gurtu on 03-09-2011 11:09:40 PM
    No this command is not required if you are using 1.5 image.

    Thanks

    Anurag Gurtu

    On Sep 3, 2011, at 7:55 AM, "Cisco Developer Community Forums" <cdicuser@developer.cisco.com> wrote:

    > Toms Jacob has created a new message in the forum "Technical Questions":
    >
    > --------------------------------------------------------------
    > Hi,
    > Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
    > Is this will use for Router Traffic also?

    > Also in one document I saw <font face="Courier" size="1"><font face="Courier" size="1">
    > service-module mgf ip address 10.
    > </font></font><font face="Courier" size="1">

    > </font>
    > P.30.2 255.255.255.0<font face="Courier" size="1"><font face="Courier" size="1">

    > </font></font><font face="Courier" size="1">

    > </font>
    > Is this command is really required ? In the installation and configuration guide I cannot find this.

    >
    > Hi Toms,
    >
    >
    >
    > Please refer to the install guide . It has a configuration with multiple vlans.
    >
    >
    >
    > http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html
    >
    >
    >
    > Regards,
    >
    > Ashwin.
    >
    >
    >
    > From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    > Sent: Saturday, August 20, 2011 5:39 AM
    > To: cdicuser@developer.cisco.com
    > Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
    >
    >
    >
    > Toms Jacob has created a new message in the forum "Technical Questions":
    >
    > --------------------------------------------------------------
    > Dear Sir,
    > I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    > I did the configuration for CME.
    > I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    > 1. ISRG2 Router
    > 2. SM-SRE-700-K9
    > 3. EHWIC - 4 Port
    >
    > I have two Vlan
    > Data : 10.31.180.0 /25
    > Voice: 10.31.180.128 /25
    >
    > I don't want to configur other than the above vlans. I have to use the MGF functionality.
    >
    > Please send me a sample configuration
    >
    > Regards
    > Toms
    > Banque Saudi Fransi
    > Voice communication section manager
    > --
    > To respond to this post, please click the following link:
    >
    > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>
    >
    > or simply reply to this email.
    >
    >
    > --
    > To respond to this post, please click the following link:
    >
    > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4443771>
    >
    > or simply reply to this email.

    Subject: RE: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
    Replied by: Toms Jacob on 05-09-2011 05:45:20 AM
    In my configuration in the router, (MGF Layer2)
    I created two Vlan
    Vlan 30 and Vlan 40. Vlan 30 is for voice and Vlan 40 is for Data.

    For the service module I need to give Ip address from Vlan 30 and Vertual machine (Windows Server) and Branch PC I need to assign the Ip Address from VLAN 40. Rest of the VLAN 30 Ip address I will use for CME IP phones in the Same router. Is this configuration possible?

    Because in the documnetation I am seeing only one VLAN created for VM.

    Regards
    Toms

    Subject: RE: Re: New Message from Toms Jacob in Service Ready Engine Virtualization
    Replied by: Toms Jacob on 05-09-2011 03:57:10 AM
    Then what is the use of EHWIC ? usnig the MGF Layer2 configuration
    The I interface is SM X/1.

    Thanks

    Anurag Gurtu

    On Sep 3, 2011, at 7:16 AM, "Cisco Developer Community Forums" <cdicuser@developer.cisco.com> wrote:

    > Toms Jacob has created a new message in the forum "Technical Questions":
    >
    > --------------------------------------------------------------
    > Hi,
    > Once I finish this configuration, Which Interface of the router I connect to the LAN, EHWIC port ? So the windows can use the MGF through EHWIC, am I correct?
    > Is this will use for Router Traffic also?
    >
    > Hi Toms,
    >
    >
    >
    > Please refer to the install guide . It has a configuration with multiple vlans.
    >
    >
    >
    > http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/sre_v.html
    >
    >
    >
    > Regards,
    >
    > Ashwin.
    >
    >
    >
    > From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    > Sent: Saturday, August 20, 2011 5:39 AM
    > To: cdicuser@developer.cisco.com
    > Subject: New Message from Toms Jacob in Service Ready Engine Virtualization - Technical Questions: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
    >
    >
    >
    > Toms Jacob has created a new message in the forum "Technical Questions":
    >
    > --------------------------------------------------------------
    > Dear Sir,
    > I am doing a branch automation study, for that I am doing a PoC. In the router I need to have CME, CUE, Windows server etc.
    > I did the configuration for CME.
    > I would like to have configuration for the SM-SRE-700-K9 MGF Layer2 for Windows server, I have the following
    > 1. ISRG2 Router
    > 2. SM-SRE-700-K9
    > 3. EHWIC - 4 Port
    >
    > I have two Vlan
    > Data : 10.31.180.0 /25
    > Voice: 10.31.180.128 /25
    >
    > I don't want to configur other than the above vlans. I have to use the MGF functionality.
    >
    > Please send me a sample configuration
    >
    > Regards
    > Toms
    > Banque Saudi Fransi
    > Voice communication section manager
    > --
    > To respond to this post, please click the following link:
    >
    > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4396371>
    >
    > or simply reply to this email.
    >
    > --
    > To respond to this post, please click the following link:
    >
    > <http://developer.cisco.com/web/srev/forums/-/message_boards/view_message/4445404>
    >
    > or simply reply to this email.


    Subject: RE: SM-SRE-700-K9 MGF Layer2 Configuration - Branch Automation
    Replied by: Brett Tiller on 06-09-2011 02:53:25 PM
    Hi Toms,

    You'll want to assign an IP to each Vlan interface in your router configuration.  In vSphere you'll need to create two port groups each with the correct vlan ID, then assign each VM to the proper Vlan.  Finally, your installed OS on each VM should reside in the same subnet as the vlan.   The details for this configuration are provided in our 'SRE-V 1.5.1 Quick Start Guide.pdf' file located at http://developer.cisco.com/web/srev/docs .

    Thanks,

    Brett