Cant't configure mgf interface from IOS CLI

Version 1
    This document was generated from CDN thread

    Created by: Merlin Yamssi on 20-11-2010 01:34:38 AM
    Hi,
     
    Just installed a 2911 router with SM-SRE-700-K9, and loaded up new image c2900-universalk9-mz.SSA.151-2.18.T downloaded from this website. Everything looks fine. But during SM 1/0 configuration, can't access mgf interface (not known) :
    router(config-if)# service-module ? => shows only ip, and not mgf.
     
    What's the problem ?
    Do I need a newerIOS image ?
     
    Thanks.
    Merlin

    Subject: RE: New Message from Merlin Yamssi in Service Ready Engine Virtualization -
    Replied by: Radhika Miriyala on 20-11-2010 01:34:38 AM
    Merlin,

    Do you have a any HWIC in your router? IF so which hwic do you have. Can you give the output of show diag.



    Thanks,

    Radhika



    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Thursday, November 04, 2010 6:08 PM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Merlin Yamssi in Service Ready Engine Virtualization - SRE-V Beta Testing: Cant't configure mgf interface from IOS CLI



    Merlin Yamssi has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    Hi,

    Just installed a 2911 router with SM-SRE-700-K9, and loaded up new image c2900-universalk9-mz.SSA.151-2.18.T downloaded from this website. Everything looks fine. But during SM 1/0 configuration, can't access mgf interface (not known) :
    router(config-if)# service-module ? => shows only ip, and not mgf.

    What's the problem ?
    Do I need a newerIOS image ?

    Thanks.
    Merlin
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2714820>
    or simply reply to this email.

    Subject: RE: New Message from Merlin Yamssi in Service Ready Engine Virtualization -
    Replied by: Michael Kinzlmaier on 20-11-2010 01:34:39 AM
    Hi Merlin,



    What application is currently installed on the SM-SRE-700-K9 ?

    The reason I ask is that the ¿mgf¿ configuration options are only available to applications that support mgf ( i.e. Galactica ) .

    If the module currently has an application that does not support mgf installed you will not see the ¿mgf¿ configuration options.



    If you install SRE-V on the module and then reload the module the mgf option should show up.



    Mike







    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Thursday, November 04, 2010 9:08 PM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Merlin Yamssi in Service Ready Engine Virtualization - SRE-V Beta Testing: Cant't configure mgf interface from IOS CLI



    Merlin Yamssi has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    Hi,

    Just installed a 2911 router with SM-SRE-700-K9, and loaded up new image c2900-universalk9-mz.SSA.151-2.18.T downloaded from this website. Everything looks fine. But during SM 1/0 configuration, can't access mgf interface (not known) :
    router(config-if)# service-module ? => shows only ip, and not mgf.

    What's the problem ?
    Do I need a newerIOS image ?

    Thanks.
    Merlin
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2714820>
    or simply reply to this email.

    Subject: RE: New Message from Michael Kinzlmaier in Service Ready Engine Virtualizat
    Replied by: Michael Kinzlmaier on 20-11-2010 01:34:39 AM
    Sorry I meant to say:



    ¿The reason I ask is that the ¿mgf¿ configuration options are only available to applications that support mgf ( i.e. SRE-V ) .¿







    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Friday, November 05, 2010 9:31 AM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Michael Kinzlmaier in Service Ready Engine Virtualization - SRE-V Beta Testing: RE: New Message from Merlin Yamssi in Service Ready Engine Virtualization -



    Michael Kinzlmaier has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    Hi Merlin,



    What application is currently installed on the SM-SRE-700-K9 ?

    The reason I ask is that the ¿mgf¿ configuration options are only available to applications that support mgf ( i.e. Galactica ) .

    If the module currently has an application that does not support mgf installed you will not see the ¿mgf¿ configuration options.



    If you install SRE-V on the module and then reload the module the mgf option should show up.



    Mike







    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Thursday, November 04, 2010 9:08 PM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Merlin Yamssi in Service Ready Engine Virtualization - SRE-V Beta Testing: Cant't configure mgf interface from IOS CLI



    Merlin Yamssi has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    Hi,

    Just installed a 2911 router with SM-SRE-700-K9, and loaded up new image c2900-universalk9-mz.SSA.151-2.18.T downloaded from this website. Everything looks fine. But during SM 1/0 configuration, can't access mgf interface (not known) :
    router(config-if)# service-module ? => shows only ip, and not mgf.

    What's the problem ?
    Do I need a newerIOS image ?

    Thanks.
    Merlin
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2714820>
    or simply reply to this email.
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2714294>
    or simply reply to this email.

    Subject: RE: Cant't configure mgf interface from IOS CLI
    Replied by: Merlin Yamssi on 20-11-2010 01:34:39 AM
    I have no application installed yet.
    I'll try installing SRE-V and see if it activate the mgf interface.
     
    Here is the output of show diag :
     

    Router2911>show diag
    Slot 0:
            C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 5 ports
            Port adapter is analyzed 
            Port adapter insertion time 03:00:38 ago
            EEPROM contents at hardware discovery:
            PCB Serial Number        : FOC14370UT1
            Hardware Revision        : 1.0
            Part Number              : 73-11833-05
            Top Assy. Part Number    : 800-30797-02
            Board Revision           : B0
            Deviation Number         : 111354
            Fab Version              : 03
            Product (FRU) Number     : CISCO2911/K9
            Version Identifier       : V02 
            CLEI Code                : CMMBR00ARA
            Processor type           : C1 
            Chassis Serial Number    : FTX1441AJDB
            Chassis MAC Address      : 1cdf.0fe1.9b18
            MAC Address block size   : 80
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00 
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF C1 8B 46 4F 43 31 34 33 37 30 55 54 31 40

             0x10: 06 18 41 01 00 82 49 2E 39 05 C0 46 03 20 00 78
              0x20: 4D 02 42 42 30 88 00 01 B2 FA 02 03 CB 8C 43 49
              0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 32 20 D9
              0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 42 52 30 30 41 52
              0x50: 41 09 C1 C2 8B 46 54 58 31 34 34 31 41 4A 44 42
              0x60: C3 06 1C DF 0F E1 9B 18 43 00 50 C4 08 00 00 00
              0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
              0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            Internal Power Supply information
            Top Assy. Part Number    : 341-0236-03
            Deviation Number         : 0
            PCB Serial Number        : AZS1410038D
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Version Identifier       : V01 


          Product (FRU) Number     : PWR-2911-POE
            CLEI Code                : 0000000000
            Board Revision           : A0
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 03 88 00 00 00
              0x10: 00 C1 8B 41 5A 53 31 34 31 30 30 33 38 44 03 00
              0x20: 81 00 00 00 00 04 00 89 56 30 31 20 CB 8C 50 57
              0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 30 30 30 30
              0x40: 30 30 30 30 30 30 F3 00 59 41 01 86 42 00 05 F8
              0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
              0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
              0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
              0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
              0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
              0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
              0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


            PVDM Slot 0:


           16-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
            Hardware Revision        : 1.0
            Part Number              : 73-11576-03
            Board Revision           : B0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC14370P4S
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Processor type           : 00 
            Product (FRU) Number     : PVDM3-16       
            Version Identifier       : V01 
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 D8 41 01 00 82 49 2D 38 03 42 42 30
              0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 34 33 37
              0x20: 30 50 34 53 03 00 81 00 00 00 00 04 00 09 00 CB
              0x30: 8F 50 56 44 4D 33 2D 31 36 20 20 20 20 20 20 20
              0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


             
            WIC Slot 0:
            1 Port Gigabit Ethernet HWIC
            Hardware Revision        : 1.0
            Top Assy. Part Number    : 800-22918-01
            Board Revision           : E0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC1439589A
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Product (FRU) Number     : HWIC-1GE-SFP
            Version Identifier       : V01 
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 00 5E 41 01 00 C0 46 03 20 00 59 86 01
              0x10: 42 45 30 88 00 00 00 00 02 03 C1 8B 46 4F 43 31
              0x20: 34 33 39 35 38 39 41 03 00 81 00 00 00 00 04 00
              0x30: CB 8C 48 57 49 43 2D 31 47 45 2D 53 46 50 89 56
              0x40: 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


             0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


            WIC Slot 1:
            3G WWAN HWIC-EVDO Rev A/Rel 0/1xRTT-800/1900MHz
            Hardware Revision        : 1.0
            Top Assy. Part Number    : 800-28727-02
            Board Revision           : D0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC14313CBV
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Fab Part Number          : 28-7666-03
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00 
            Field Diagnostics Data   : 00 00 00 00 00 00 00 00 
            Product (FRU) Number     : HWIC-3G-CDMA-V
            Version Identifier       : V02 
            CLEI Code                : COUIAX7CAA
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 1F 41 01 00 C0 46 03 20 00 70 37 02
              0x10: 42 44 30 88 00 00 00 00 02 03 C1 8B 46 4F 43 31


             0x20: 34 33 31 33 43 42 56 03 00 81 00 00 00 00 04 00
              0x30: 85 1C 1D F2 03 C4 08 00 00 00 00 00 00 00 00 C5
              0x40: 08 00 00 00 00 00 00 00 00 CB 8E 48 57 49 43 2D
              0x50: 33 47 2D 43 44 4D 41 2D 56 89 56 30 32 20 D9 02
              0x60: 40 C1 C6 8A 43 4F 55 49 41 58 37 43 41 41 FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


    Slot 1:
            Services Module with Services Ready Engine Port adapter, 1 port
            Port adapter is analyzed 
            Port adapter insertion time 03:00:37 ago
            EEPROM contents at hardware discovery:
            Hardware Revision        : 1.0
            Part Number              : 73-12056-05
            Top Assy. Part Number    : 800-31381-02
            Board Revision           : A0
            Deviation Number         : 0
            Fab Version              : 04
            PCB Serial Number        : FOC14232JMH
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Product (FRU) Number     : SM-SRE-700-K9


            Version Identifier       : V02 
            CLEI Code                : IPUCAZ5BAA
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00 
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 06 50 41 01 00 82 49 2F 18 05 C0 46 03
              0x10: 20 00 7A 95 02 42 41 30 88 00 00 00 00 02 04 C1
              0x20: 8B 46 4F 43 31 34 32 33 32 4A 4D 48 03 00 81 00
              0x30: 00 00 00 04 00 CB 8D 53 4D 2D 53 52 45 2D 37 30
              0x40: 30 2D 4B 39 89 56 30 32 20 D9 03 40 C1 CB C6 8A
              0x50: 49 50 55 43 41 5A 35 42 41 41 C4 08 00 00 00 00
              0x60: 00 00 00 00 F3 00 06 40 0B E3 43 00 28 FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    Subject: RE: New Message from Merlin Yamssi in Service Ready Engine Virtualization -
    Replied by: Radhika Miriyala on 20-11-2010 01:34:39 AM
    Thanks Merlin. Your show diag output shows two HWICS. With some of the older generation HWICS the mgf configuration you have to use is different.



    You will need to configure the ip address using a different set of CLI¿s similar to that of the IOS release 15.1(2)T. If you have the Beta user guide document than follow the instruction appendix to configure .



    Thanks,

    Radhika



    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Monday, November 08, 2010 12:01 PM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Merlin Yamssi in Service Ready Engine Virtualization - SRE-V Beta Testing: RE: Cant't configure mgf interface from IOS CLI



    Merlin Yamssi has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    I have no application installed yet.
    I'll try installing SRE-V and see if it activate the mgf interface.

    Here is the output of show diag :


    Router2911>show diag
    Slot 0:
            C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 5 ports
            Port adapter is analyzed
            Port adapter insertion time 03:00:38 ago
            EEPROM contents at hardware discovery:
            PCB Serial Number        : FOC14370UT1
            Hardware Revision        : 1.0
            Part Number              : 73-11833-05
            Top Assy. Part Number    : 800-30797-02
            Board Revision           : B0
            Deviation Number         : 111354
            Fab Version              : 03
            Product (FRU) Number     : CISCO2911/K9
            Version Identifier       : V02
            CLEI Code                : CMMBR00ARA
            Processor type           : C1
            Chassis Serial Number    : FTX1441AJDB
            Chassis MAC Address      : 1cdf.0fe1.9b18
            MAC Address block size   : 80
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF C1 8B 46 4F 43 31 34 33 37 30 55 54 31 40

             0x10: 06 18 41 01 00 82 49 2E 39 05 C0 46 03 20 00 78
              0x20: 4D 02 42 42 30 88 00 01 B2 FA 02 03 CB 8C 43 49
              0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 32 20 D9
              0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 42 52 30 30 41 52
              0x50: 41 09 C1 C2 8B 46 54 58 31 34 34 31 41 4A 44 42
              0x60: C3 06 1C DF 0F E1 9B 18 43 00 50 C4 08 00 00 00
              0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
              0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            Internal Power Supply information
            Top Assy. Part Number    : 341-0236-03
            Deviation Number         : 0
            PCB Serial Number        : AZS1410038D
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Version Identifier       : V01


          Product (FRU) Number     : PWR-2911-POE
            CLEI Code                : 0000000000
            Board Revision           : A0
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 03 88 00 00 00
              0x10: 00 C1 8B 41 5A 53 31 34 31 30 30 33 38 44 03 00
              0x20: 81 00 00 00 00 04 00 89 56 30 31 20 CB 8C 50 57
              0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 30 30 30 30
              0x40: 30 30 30 30 30 30 F3 00 59 41 01 86 42 00 05 F8
              0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
              0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
              0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
              0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
              0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
              0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
              0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


            PVDM Slot 0:


           16-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
            Hardware Revision        : 1.0
            Part Number              : 73-11576-03
            Board Revision           : B0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC14370P4S
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Processor type           : 00
            Product (FRU) Number     : PVDM3-16      
            Version Identifier       : V01
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 D8 41 01 00 82 49 2D 38 03 42 42 30
              0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 34 33 37
              0x20: 30 50 34 53 03 00 81 00 00 00 00 04 00 09 00 CB
              0x30: 8F 50 56 44 4D 33 2D 31 36 20 20 20 20 20 20 20
              0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


            
            WIC Slot 0:
            1 Port Gigabit Ethernet HWIC
            Hardware Revision        : 1.0
            Top Assy. Part Number    : 800-22918-01
            Board Revision           : E0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC1439589A
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Product (FRU) Number     : HWIC-1GE-SFP
            Version Identifier       : V01
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 00 5E 41 01 00 C0 46 03 20 00 59 86 01
              0x10: 42 45 30 88 00 00 00 00 02 03 C1 8B 46 4F 43 31
              0x20: 34 33 39 35 38 39 41 03 00 81 00 00 00 00 04 00
              0x30: CB 8C 48 57 49 43 2D 31 47 45 2D 53 46 50 89 56
              0x40: 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


             0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


            WIC Slot 1:
            3G WWAN HWIC-EVDO Rev A/Rel 0/1xRTT-800/1900MHz
            Hardware Revision        : 1.0
            Top Assy. Part Number    : 800-28727-02
            Board Revision           : D0
            Deviation Number         : 0
            Fab Version              : 03
            PCB Serial Number        : FOC14313CBV
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Fab Part Number          : 28-7666-03
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00
            Field Diagnostics Data   : 00 00 00 00 00 00 00 00
            Product (FRU) Number     : HWIC-3G-CDMA-V
            Version Identifier       : V02
            CLEI Code                : COUIAX7CAA
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 05 1F 41 01 00 C0 46 03 20 00 70 37 02
              0x10: 42 44 30 88 00 00 00 00 02 03 C1 8B 46 4F 43 31


             0x20: 34 33 31 33 43 42 56 03 00 81 00 00 00 00 04 00
              0x30: 85 1C 1D F2 03 C4 08 00 00 00 00 00 00 00 00 C5
              0x40: 08 00 00 00 00 00 00 00 00 CB 8E 48 57 49 43 2D
              0x50: 33 47 2D 43 44 4D 41 2D 56 89 56 30 32 20 D9 02
              0x60: 40 C1 C6 8A 43 4F 55 49 41 58 37 43 41 41 FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


    Slot 1:
            Services Module with Services Ready Engine Port adapter, 1 port
            Port adapter is analyzed
            Port adapter insertion time 03:00:37 ago
            EEPROM contents at hardware discovery:
            Hardware Revision        : 1.0
            Part Number              : 73-12056-05
            Top Assy. Part Number    : 800-31381-02
            Board Revision           : A0
            Deviation Number         : 0
            Fab Version              : 04
            PCB Serial Number        : FOC14232JMH
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Product (FRU) Number     : SM-SRE-700-K9


            Version Identifier       : V02
            CLEI Code                : IPUCAZ5BAA
            Manufacturing Test Data  : 00 00 00 00 00 00 00 00
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 06 50 41 01 00 82 49 2F 18 05 C0 46 03
              0x10: 20 00 7A 95 02 42 41 30 88 00 00 00 00 02 04 C1
              0x20: 8B 46 4F 43 31 34 32 33 32 4A 4D 48 03 00 81 00
              0x30: 00 00 00 04 00 CB 8D 53 4D 2D 53 52 45 2D 37 30
              0x40: 30 2D 4B 39 89 56 30 32 20 D9 03 40 C1 CB C6 8A
              0x50: 49 50 55 43 41 5A 35 42 41 41 C4 08 00 00 00 00
              0x60: 00 00 00 00 F3 00 06 40 0B E3 43 00 28 FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2722866>
    or simply reply to this email.

    Subject: RE: Cant't configure mgf interface from IOS CLI
    Replied by: Merlin Yamssi on 20-11-2010 01:34:39 AM
    I've downloaded everything from the Beta website. The document talk about IOS version 15.1(3)T, but on the website the image version provided is c2900-universalk9-mz.SSA.151-2.18.T.
    Is there a place to download a newer version ?
     
    Regards,
    Merlin

    Subject: RE: New Message from Merlin Yamssi in Service Ready Engine Virtualization -
    Replied by: Radhika Miriyala on 20-11-2010 01:34:39 AM
    Merlin.

    The image 151-2.18.T. is the latest beta image and is 15.1(3)T.  It is not versioned as 15.1(3) since it is a beta build.   The suggestion to use the other config is because of the HWIC¿s.



    Thanks,

    Radhika

    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Monday, November 08, 2010 12:48 PM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Merlin Yamssi in Service Ready Engine Virtualization - SRE-V Beta Testing: RE: Cant't configure mgf interface from IOS CLI



    Merlin Yamssi has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    I've downloaded everything from the Beta website. The document talk about IOS version 15.1(3)T, but on the website the image version provided is c2900-universalk9-mz.SSA.151-2.18.T.
    Is there a place to download a newer version ?

    Regards,
    Merlin
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2720146>
    or simply reply to this email.