sre-v-installer

Version 1
    This document was generated from CDN thread

    Created by: Josip Zimet on 20-11-2010 01:34:00 AM
    Dear alias members,
     
    can you please tell me which files should I install sre-v-installer.smv.1.0.0.35, sre-v-installer-k9.smv.1.0.0.35.prt1 or sre-v-mgmt-k9.smv.1.0.0.35.prt1 (I got all these files when I unzip sre-v.beta.install-2.1.0.0.35). I installed sre-v-installer-k9.smv.1.0.0.35.prt1 via command service-module sm 2/0 install url ftp://server.com/dir/sre-v-k9.smv.1.0.1.pkg according to the manual and this is the latest status ...
     
     
    Router#service-module sm1/0 status
    Service Module is Cisco SM1/0
    Service Module supports session via TTY line 67
    Service Module is trying to recover from error
    Service Module heartbeat-reset is enabled
    Service Module is in fail open
    Service Module status is not available
    No install/uninstall in progress

    Local Partition Info
    =====================
      Please reset module to retrieve
      partition information if needed

    Router#
     
    if you want to connect to sre and verify/finish install ip address is 10.62.63.68 pasword and enable password are same cisco
     
    Josip Zimet

    Subject: RE: New Message from Josip Zimet in Service Ready Engine Virtualization - S
    Replied by: Radhika Miriyala on 20-11-2010 01:34:00 AM
    Hi Josip,

    You need to use the sre-v-k9.smv.1.0.0.35.pkg.



    Please let us know if you have more questions.



    Thanks,

    Radhika



    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Friday, September 24, 2010 9:11 AM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Josip Zimet in Service Ready Engine Virtualization - SRE-V Beta Testing: sre-v-installer



    Josip Zimet has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    Dear alias members,

    can you please tell me which files should I install sre-v-installer.smv.1.0.0.35, sre-v-installer-k9.smv.1.0.0.35.prt1 or sre-v-mgmt-k9.smv.1.0.0.35.prt1 (I got all these files when I unzip sre-v.beta.install-2.1.0.0.35). I installed sre-v-installer-k9.smv.1.0.0.35.prt1 via command service-module sm 2/0 install url ftp://server.com/dir/sre-v-k9.smv.1.0.1.pkg according to the manual and this is the latest status ...


    Router#service-module sm1/0 status
    Service Module is Cisco SM1/0
    Service Module supports session via TTY line 67
    Service Module is trying to recover from error
    Service Module heartbeat-reset is enabled
    Service Module is in fail open
    Service Module status is not available
    No install/uninstall in progress

    Local Partition Info
    =====================
      Please reset module to retrieve
      partition information if needed

    Router#

    if you want to connect to sre and verify/finish install ip address is 10.62.63.68 pasword and enable password are same cisco

    Josip Zimet
    --
    To respond to this post, please click the following link:
    <http://developer.cisco.com/group/srev/forums/-/message_boards/message/2573128>
    or simply reply to this email.

    Subject: Re: New Message from Radhika Miriyala in Service Ready Engine Virtualizatio
    Replied by: Josip Zimet on 20-11-2010 01:34:00 AM
    Thanks Radhika,

    Can you please tell me where I can find sre-v-k9.smv.1.0.0.35.pkg .. It was
    not in sre-v.beta.install-2.1.0.0.35.tar ..    Comment on
    sre-v.beta.install-2.1.0.0.35.tar ...Installation files. Build 35. Download
    and extract into same directory as install 1 files.

    jz

    Subject: RE: New Message from Josip Zimet in Service Ready Engine Virtualization - S
    Replied by: Radhika Miriyala on 20-11-2010 01:34:00 AM
    Josip,

    Did you download both the sre tar.gz files

    Brett had to divide the tar files into two because of the file size limit on the forums.

    Please download both into the same directory and use the pkg file I mentioned below to Install.



    Thanks,

    Radhika

    Subject: Re: New Message from Josip Zimet in Service Ready Engine Virtualization - S
    Replied by: Josip Zimet on 20-11-2010 01:34:00 AM
    Hi Radhika, All.

    I probe to extract sre-v.beta.install-2.1.0.0.35.tar.gz with zipeg, archive,
    stuffit and I always get 3 files without .pkg exstension.

    Regards
    jz

    Subject: RE: New Message from Josip Zimet in Service Ready Engine Virtualization - S
    Replied by: Radhika Miriyala on 20-11-2010 01:34:01 AM
    Did you download the sre-v.beta.install-1.1.0.0.35.tar.gz?


    From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
    Sent: Friday, September 24, 2010 9:39 AM
    To: cdicuser@developer.cisco.com
    Subject: New Message from Josip Zimet in Service Ready Engine Virtualization - SRE-V Beta Testing: Re: New Message from Josip Zimet in Service Ready Engine Virtualization - S



    Josip Zimet has created a new message in the forum "SRE-V Beta Testing":
    --------------------------------------------------------------
    Hi Radhika, All.

    I probe to extract sre-v.beta.install-2.1.0.0.35.tar.gz with zipeg, archive,
    stuffit and I always get 3 files without .pkg exstension.

    Regards
    jz

    Subject: Re: New Message from Radhika Miriyala in Service Ready Engine Virtualizatio
    Replied by: Josip Zimet on 20-11-2010 01:34:02 AM
    Dear support,

    I tested sre-v.beta.install-1.1.0.0.35.tar.gz  with winzip using suggestions
    form Installation and Configuration Guide ³disable CR/LF conversion of tar
    files³ .. And still getting 3 files without .pkg exstension. Any advice ?

    Regards,
    jz

    Subject: RE: New Message from Josip Zimet in Service Ready Engine Virtualization - S
    Replied by: Ashwin Venkatesan on 20-11-2010 01:34:02 AM
    Hi Josip,

    What are the files you see after the extract?   As regards to the install we use 1 pkg file..(sre-v-k9.smv.1.0.0.x.pkg)

    Thanks,

    Ashwin

    Subject: RE: New Message from Ashwin Venkatesan in Service Ready Engine Virtualizati
    Replied by: Radhika Miriyala on 20-11-2010 01:34:02 AM
    Hi Josip,

    Did you download both the ZIP files for the .35 image?  There was a size issue on the message forum so we had to post the image in two zip files. Please download both of them and unzip them into the same directory.,One of the zip file will have the sre-v-k9.smv.1.0.0.35.pkg file.

    Thanks,
    Radhika