"Line 1 on Device SEPXXXXXXXXX" - Display,ASCII Display,External phone mask

Version 1
    This document was generated from CDN thread

    Created by: Alex Arwine on 23-10-2008 10:55:07 PM
    I'm having issues finding these fields in AXL.
    Display,ASCII Display,External phone mask

    Seems the only appear in call manager when the line is associated with a phone.

    Any guidance?

    Thanks!
    -Alex

    Subject: Re: "Line 1 on Device SEPXXXXXXXXX" - Display,ASCII Display,External phone
    Replied by: David Staudt on 24-10-2008 12:59:49 AM
    These fields are modifiable via:

    updatePhone/lines/line/

    I believe e164Mask is equivalent to External Phone Mask

    Subject: Re: "Line 1 on Device SEPXXXXXXXXX" - Display,ASCII Display,External phone
    Replied by: Stephan Steiner on 24-10-2008 08:05:48 AM
    Alex, you are correct, those fields are only accessible if you have a directory number (that's the proper term to be used in ccm.. line is something else and I'll get to that right away) - if you configure a DN in itself (Call Routing - Directory Number) in ccmadmin, you'll see that those fields are not there.

    It works like this. you have the device (table device in the database) and the directory number (table numplan in the db) and if you associate a dn with the device, the association is done with a line (table devicenumplanmap).. and that line has certain properties (which are as David mentioned in the <device><lines><line>... right here</line></lines></device> tag).. you also see those properties reflected in the devicenumplanmap table in the database.

    Note that you cannot configure line values without associating a DN to a device in ccmadmin either.. so AXL just offers the same access as ccmadmin.

    Subject: Re: "Line 1 on Device SEPXXXXXXXXX" - Display,ASCII Display,External phone
    Replied by: Alex Arwine on 24-10-2008 11:03:24 PM
    Cool - This is awesome, finally coming together.

    One more issue but that's for another post.

    Thanks guys!
    -Alex